Attic insulation gap
Pick your climate zone, say what is in the attic now, and see how much R-value is missing and how many inches would close the gap.
Find yours on the state help page for your state, or on the ENERGY STAR map.
Measure the pile, not the joists. 0 if empty.
Fills in from the choice above; edit if you know better.
Printed on the bag or batt label.
How it works
Your R-value is the depth of insulation times its R per inch. The tool compares it with the figure ENERGY STAR gives for an uninsulated attic in your climate zone, and divides what is missing by the R per inch of the insulation you plan to add.
Example: zone 3, 6 in of fiberglass batts at R-3.1 is about R-18.6. The target is R-49, so about R-30.4 is missing, or 8.7 in of blown cellulose at R-3.5.
Read this before you order
ENERGY STAR's retrofit table, headed "Add Insulation to Attic," gives R-49 for an uninsulated attic in zones 2 and 3, and R-38 for one that already has 3 to 4 inches. This tool treats the uninsulated figure as the total to reach. R per inch is typical, not exact: loose-fill settles and products differ, so use the label. Seal air leaks and keep soffit vents clear before you add anything on top (see attic insulation and air sealing).